Click image to view full size image
T-5L non-detachable structure reflow oven worked with hot wind to solder PCB, support most normal components, LED and kinds of IC.
Features:
1. Five heating zones can make inside temperature more accurate and well-proportioned, just need 15-20mins to reach the working temperature.
(First:Fast preheat zone Second:Soldering zone Third:Drying zone Fourth/Fifth:Bottom-side heat zones)
2. Using AC motor to drive the conveyor belt, chain type transmission way. Speed adjustment is controlled by automatic electronic analog switch, which sensitivity no more than 1 degree,control accuracy ±10mm/min.
3. Support working under both single Phase(220V)and Three phases(380V),suit both lead or lead-free solder paste
4. Cooling fan:Mainly to cool the welded PCB,or cool the heat parts inside machine to guarantee their good work.
5. Signal lights:Supervise the work condition of the machine, that is,signal lights indicate the temperature of the machine in normal and abnormal working state .
6. Emergency Stop Button-Support Abnormal Shutdown during breakdown situation
7.Support adjust the height of the base,which is convenient to build a Complete Automatic SMT Production Line with other SMT Machines
Parameter:
|
Length*Width*Height (mm) |
1700×700×1280 |
|
Peak Power(KW) |
7 |
|
Working Power(KW) |
3 |
|
Input Voltage(V) |
220/380 |
|
Conveyor Width(mm) |
300 |
|
Standard Max Height (mm) |
20 |
|
Customized Max height(mm) |
55 |
|
Max Speed of Conveyor (mm) |
1200 |
|
Packing Size |
190*70*128CM |
|
Gross Weight |
220KG |
E-mail: 